Maine Glass Between the Glass System with 2” Blinds Specifications

Maine Glass Interior Insulating Windows have an option for encapsulating a blind to prevent damage to the blind and greatly decreasing solar heat gain in a building. It is unique retro fit system that all commercial buildings can benefit from. This encapsulated blind system works with all types of Secondary Glazing and Window Inserts to provide unmatched longevity to a blind system.

2000 Series- (2”) Architectural Guide Specifications

The headrails are fabricated from steel which is 0.24" in thickness and iron phosphate treated. The rails are polyester baked enamel. Width 2 1/4" x height 2". Color coordinated to the slats and the bottom rail. Bottom Rail 0.018" in thickness, same treating and paint process as the headrail. Width 2" x height 7/8". Color coordinated to the slats and the headrail. Lock seam sealed for better strength and cleanliness. Slats (aluminum) 8" gauge 0.008" thick, spring tempered aluminum, to have a nominal width of 2". All slats are finished with a polyester, baked enamel finish coating. Tape Drums Made of steel with a thickness of 0.032" Drum Supports The tape drum supports are constructed of heavy-duty plastic. Ladders Superior torque strength braided polyester yarn, with spacing 44 mm. Tilt Rod Square shaped steel, galvanized to prevent corrosion. Lift Cord Made with a braided Polyester jacket and Rayon core of sufficient length to control the raising and lowering of the blind. End Brackets Box type with a hinged door. Constructed of cold rolled steel. Finished with polyester baked enamel coating Tilt control knob The knobs are made of heavy-duty plastic attached to a .188” steel flex cable with steel fittings on each end. Headrail cable Cables are made of .188” steel flex cable with steel fittings on each end. © Window Accessory Company, Inc. Contact us with questions or comments.